Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

10.06.2025 02:51

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

One

But… the neutral is now “floating” because of the 1 ohm resistance.

the problem then depends on "how fast does the fuse operate?".

The Webb telescope found something exceedingly rare around a dying star - Mashable

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

The MOV will conduct when the voltage exceeds 50% of line voltage.

Why is the left keep misrepresenting what Trump said about his daughter? When asked if he would date her if he weren’t her father, it simply reflected pride in raising a smart, respectful, and loving daughter with good morals all men want that no?

This is 'the assistant's answer'

eight

This is the picture of an electronic coil of wire wound around a core of magnetic material.

Fans slam Gearbox CEO Randy Pitchford's message to "cost sensitive" fans - Eurogamer

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

a photo is worth a thousand words.

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

NYC summer stargazing seasons kicks off with triangle, meteor showers - Gothamist

[old diagram got deleted by accident]

The third is lightning and “how it gets conducted into a home.”

In schematic diagrams this is the symbol for a fuse:

Is there a specific time frame for therapists to tell their clients they are wrong?

A fuse is a non-resetable over current circuit protector.

He then asserts :

The bolt then partially travels down the line to your home.

Why do I feel worthless most of the time?

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

What does a fuse do?

I post the exact comment here.

Ive been pretending to be okay and acting as normal as possible, but Im actually completely heartbroken after a recent breakup. Its painful and really affecting me, to the point where I cant concentrate at work, Ive lost my appetite, I cant sleep, and It feels as if my whole world has been turned upside down. I loved him so much. He said so many cruel things to me and it made me realize he must not have loved me the way I loved him, or he wouldnt have said such horrible things. How do I handle the heartbreak and why cant I accept that he didnt love me and just forget about him?

Edit 2024–10.

but this device (an Inductor) … impedes the rapid changes in the current.

Can the fuse protect the electronic devices from lightning instead of a surge protector.

What is the most overrated pleasure? Why?

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

so, what happens?

Jane Birkin’s original Hermès bag goes on sale - CNN

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

For this case there are devices called Metal oxide varistors (MOV).

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

What is the most popular boat rental service in Pompano Beach for birthday parties or special events?

A circuit breaker is similar, but is resettable.

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

First Sentence:

[image of Common-mode choke]

There are two important concepts here.

These devices are installed between the “hot” and “neutral” and protective ground.

He then describes the function of a fuse.

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

One is “what exactly is in a ‘surge protector’ ? ”

but I think this circuit , shows a few more pieces.

So, the voltage could go up to 500 volts, and the fuse will not open up.

(Dc diagram shown, AC is similar).

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

At one ohm, the resistor has a maximum of 1 watt power.

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

what exactly is a ‘surge’ protector?

This device then solves the entire problem.

The other is “what does a “fuse” do?”

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

Upvotes:

At least they know the answer if they wanted it.

What is lightning?

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

Because the load is inductive, the current lags the voltage.(by a bit).

This is where the MOV conducts again, and dissipated the energy.

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

Here is a simplified AC power diagram.

2024–10–14 [Omar Gharbi Omar Gharbi ]

An AC voltage/ current source, and an ac inductive load.

This is where this question deviates from being a 'generic' question, and becomes more specific.

He then describes Rainy Season and Lightning.

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

But it can get overloaded, and no longer works.

nine

It seems Mohan does not understand the difference between a comment and an Answer.

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

Barnstars:

There are three different concepts here that are getting confused.

These are simplified answers to the original question, and does not change anything I wrote above.

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

2024–10–10[John johnson John Johnson ]

This one hit behind the barn.

2024–10–16 [ OO OLAOYE OYEBODE ]

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

It also is a device that limits the change in current flow.

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

Now when you have a certain ac resistance, then a current flows in a loop.